manualshive.com logo in svg

KTI Networks KGS-2422, Руководство по установке, Страница: 29 / 32

Поделиться
Скачать
KTI Networks KGS-2422 Скачать руководство пользователя страница 29

-29- 

IP Address 

Provide the IP address of this switch unit. 

IP Mask 

Provide the IP mask of this switch unit. 

IP Router 

Provide the IP address of the default router for this switch unit. 

VLAN ID 

Provide the managed VLAN ID. The allowed range is 

1

 through 

4095

. 

SNTP Server 

Provide the IP address of the SNTP Server. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

  Save   

Click to save the changes. 

  Reset   

Click to undo any changes made locally and revert to previously saved values. 

  Renew   

Click to renew DHCP. This button is only available if DHCP is enabled. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

Note:  

1.

 

If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP 

address is non-zero, DHCP will stop and the configured IP settings will be used. The DHCP client will 

announce the configured System Name as hostname to provide DNS lookup. 

2.

 

The IP addresses should be in dotted decimal notation. 

 

3.3 Configuring IP Address & Password via console and telnet 

[Password]

 setting command is in System command group. 

 

 >System password <password>

↵

 

Parameters: 

 <password>

: The allowed password string length is 0 to 31, and the allowed content is the ASCII 

characters from 32 to 126. 

 

[IP] command group is used to configure the switch’s IP settings. The command syntax is: 

 >IP 

DHCP 

[enable|disable] 

 

>IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>] 

Parameters: 

 

<ip_addr>

: IP address (a.b.c.d), default: Show IP address 

 

<ip_mask>

: IP subnet mask (a.b.c.d), default: Show IP mask 

 

<ip_router>

: IP router (a.b.c.d), default: Show IP router 

 

<vid>

: VLAN ID (1-4095), default: Show VLAN ID 

 

3.4 Reference Manuals for Web, Console, Telnet Management 

The following operation manuals are also provided separately for Console, Telnet and Web management: 

Содержание KGS-2422

































Отзывы:

Нет отзывов