KTI Networks KGS-1064-HP Скачать руководство пользователя страница 67

Страница: 67 / 240

-67-

2.5.2.3.3 Access Control List

Configuration

Description

Ingress Port

Indicates the ingress port of the

ACE

. Possible values are:

All

: The ACE will match all ingress port.

Port

: The ACE will match a specific ingress port.

Policy/Bitmask

Indicates the policy number and bitmask of the ACE.

Frame Type

Indicates the frame type of the ACE. Possible values are:

Any

: The ACE will match any frame type.

EType

: The ACE will match Ethernet Type frames. Note that an Ethernet Type based

ACE will not get matched by IP and ARP frames.

ARP

: The ACE will match ARP/RARP frames.

IPv4

: The ACE will match all IPv4 frames.

IPv4/ICMP

: The ACE will match IPv4 frames with ICMP protocol.

IPv4/UDP

: The ACE will match IPv4 frames with UDP protocol.

IPv4/TCP

: The ACE will match IPv4 frames with TCP protocol.

IPv4/Other

: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.

IPv6

: The ACE will match all IPv6 standard frames.

Action

Indicates the forwarding action of the ACE.

Permit

: Frames matching the ACE may be forwarded and learned.

Deny

: Frames matching the ACE are dropped.

Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When

Disabled

displayed, the rate limiter operation is disabled.

Port Redirect

Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to

the port number. The allowed values are

Disabled

or a specific port number. When

Disabled

is displayed, the port redirect operation is disabled.

Mirror

Specify the mirror operation of this port. Frames matching the ACE are mirrored to the

destination mirror port. The allowed values are:

Enabled

: Frames received on the port are mirrored.

Disabled

: Frames received on the port are not mirrored.

The default value is "

Disabled

Counter

The counter indicates the number of times the ACE was hit by a frame.

ACE modification buttons:

(+)

Inserts a new ACE before the current row.

Содержание KGS-1064-HP

















































































































































































































































Результаты поиска

Содержание KGS-1064-HP

Отзывы:

Похожие инструкции для KGS-1064-HP

Бренды по названию

Популярные бренды

KTI Networks KGS-1064-HP, Руководство пользователя

Результаты поиска

Содержание KGS-1064-HP

Отзывы:

Похожие инструкции для KGS-1064-HP

Бренды по названию

Популярные бренды