2
RGS-3084M- E
After installing the switch, you can check its status from the LED indicators on the front
panel shown below.
5. LED Description
Following is the LED description:
LED Status
Operation
Steady Green
The switch is powered on.
Power
Off
The switch is powered off.
Steady Amber
Connected to 10/100M network
Steady Green
Connected to 1000M network
Blinking Transmitting/receiving
data
Port LED
Off
No device is connected
Steady Green
Delivering Power to PoE devices.
PoE
Off
PoE function not active.
On (Green)
Total PoE power consumed is over 50W
PoE Alert
Off
Total PoE power consumed is less than 50W
6. Connecting Computers
The switch features auto-MDI/MDIX crossover detection function and provides
plug-and-play capability. Users can immediately use the features of the product simply by
plugging the network cables (RJ45) to the computers and the switches.
7. Hardware Installation
1. Connect one Ethernet port to your router’s LAN port with an Ethernet cable.
2. Connect your computer to one port of the switch with an Ethernet cable.
3. Plug DC end of the provided Power Adapter into the power jack of the switch and the
AC end to a standard electrical socket.
8. Uplink
All Ports can be used as an uplink port for connecting another Ethernet switch without using
crossover cable. You may extend the network distance more than 100m or the number of
connected computers by linking another switch or hub.
