4
Configuration
This Ethernet adapter is automatically
configured when you power-on computer. In
certain computer, however, you must modify
BIOS by entering CMOS SETUP utility to
enable “PCI Device” and map INTA to an
appropriate address. Please refer to the
system documentation for details on
configuration the PCI SYSTEM BIOS.
Driver Installation
Before you connect adapter to the network,
you have to install the network driver first.
The driver for each Networking Operating
System is under a separate directory. A
HELPME.EXE file under root directory lists
the information and detailed installation
procedure of all the available driver.
Boot ROM Installation
The optional Boot ROM device allows you to
connect a diskless workstation to the
network. Perform the following steps to
install your Boot ROM device:
1.
Insert the Boot ROM into the socket on
the adapter.
2.
Refer to the installation procedure
provided by Networking Operating
System.
