-14-
2.8 LED Indication
LED
Function
State
Interpretation
POWER
Power status
ON
The power is supplied to the switch.
OFF
The power is not supplied to the switch.
LNK/1000M/ACT
Port link status
ON
A 1000M link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF
Port link is down.
LNK/100M/ACT
Port link status
ON
A 100M link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF
Port link is down.
LNK/10M/ACT
Port link status
ON
A 10M link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF
Port link is down.
P6 LNK
Port6 link status
ON
A 1000M link is established on Port 6.
BLINK Port 6 link is up and there is traffic.
OFF
Port 6 link is down.
P6 OL
Port6 optical link
ON
Optical signal is detected on Port 6.
OFF
No optical signal is detected on Port 6.
2.9 Configuring IP Address and Password for the Switch
The switch is shipped with the following factory default settings for software management :
Default
IP address of the switch :
192.168.0.2 / 255.255.255.0
The IP Address is an identification of the switch in a TCP/IP network. Each switch should be desig-
nated a new and unique IP address in the network. Refer to Web management interface for System
Configuration.
The switch is shipped with factory default password
123
for software management.
The password is used for authentication in accessing to the switch via Http web-based interface. For
security reason, it is recommended to change the default settings for the switch before deploying it to
your network. Refer to Web management interface for System Configuration.
Содержание A3349
Страница 26: ... 26 4 4 System ...
