CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.55 of 68
CLEAN THE PANEL WITH A JET OF AIR OR WASH IT WITH WATER.
DO NOT USE SOLVENTS.
THE PRE-FILTER PANEL MUST BE CLEANED OR REPLACED
WITH THE MACHINE OFF AND WITH THE UNIT AT ATMOSPHERIC
PRESSURE.
OIL LEVEL CHECKS AND TOP UPS MUST BE PERFORMED WITH THE
MACHINE OFF AND WITH THE UNIT AT ATMOSPHERIC PRESSURE.
THE OIL REMOVED MUST BE DISCARDED IN COMPLIANCE WITH
CURRENT LAW.
IN SEVERE WORKING ENVIRONMENTS (e.g.: PARTICULARLY DUSTY
WORK SITES), THE MAINTENANCE INTERVAL MUST BE SHORTER.
INCORRECT MAINTENANCE OF THE OIL FILTER, AIR FILTER AND OIL
SEPARATOR CAN DAMAGE THE UNIT.
LEAVING CARTRIDGES IN OPERATION FOR LONGER THAN THE
INDICATED TIME CAN DAMAGE THE COMPRESSOR.
ALWAYS CAREFULLY COMPLY WITH THE SAFETY WARNINGS
REGARDING USE OF THE MACHINE. THIS IS ABSOLUTELY ESSENTIAL.
MAINTENANCE MUST BE CARRIED OUT BY SPECIALISED PERSONNEL.
ALWAYS FOLLOW CURRENT ACCIDENT PREVENTION STANDARDS (USE
ADEQUATE PROTECTION).
