How to Use
(Figure 8)
About 5cm
Level Gauge
Aspiration Nozzle
Estimated Insertion
Engine
Aspiration
Nozzle
Level Gauge
Guide Pipe
Oil Pan
Click
Click
<Situation when Aspiration Nozzle touches oil pan>
(Figure 9)
(Figure 10)
Inflow Valve
Click
Close
Close
Close
Close
Aspiration
Nozzle Valve
Discharge
Hose Valve
Tighten
Loosen
Pull Up to Upper Limit
(Figure 11)
Turn
○Extraction Work
How to Upward Draining
Remove an oil filler cap.
Pull out the oil level gauge.
Select the aspiration nozzle.
Insert aspiration nozzle into guide pipe of level gauge.
Remove the nozzle cap of the aspiration hose and
connect the aspiration nozzle and the aspiration hose.
6.
Stop at the position corresponding plugging away to the oil pan.
Open the aspiration nozzle valve then work begins.
Close the aspiration hose valve once the aspiration is finished,
separate it from aspiration nozzle and then install nozzle cap.
Pull out the aspiration nozzle, then return level gauge to guide pipe.
How to Discharge Waste Oil
○Prepare for Discharge
Loosen dial nut and pull up waste oil tray to upper limit.
Tighten dial nut.
Close inflow valve, discharge hose valve,
aspiration nozzle valve and discharge air regulator.
Turn dial of ejector clockwise fully.
Remove the nozzle cap of the discharge hose
and insert to place for discharging.
(Click sound from connection part can be heard)
(Figure 9)
(Figure 10)
(Figure 11)
(Figure 8)