Hex Key Wrench & Hex Hole Bolt 8mm (HLD100-06)
L-Shaped Hex Key Wrench and Hex Hole Bolt 8mm (2pcs.) that are used for removing the Brake Drum.
This tool can be used for standard-sized automobile and small track (2 tons class).
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
Usage Instructions
1. Insert Hex Bolt on Drum.
2. Tighten the bolts by Hex Key Wrench.
NOTE: To prevent breakage of a Drum, make
sure to tighten Bolts Equally.
In case of overtighten, the Drum might
be broken.
Brake Shoe Adjustment Tools (ABX301, 302, 303)
Hooking Tools that are used for adjusting the brake (Clearance adjustment between Drum and Shoe).
This tool can be used for standard-sized automobile and small track (2 tons class).
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
This Hooking Tool has sharp point. Use with Caution.
Any modifications are prohibited (sharpening, bending, etc.)
Usage Instructions
1. Take a Rubber Cap on Brake Shoe Adjust
Hole off, then insert Brake Shoe
Adjustment Tool.
Choose the Adjustment tool according to
the structure of Brake Drum.
2. Turn a Shoe Adjuster by the Adjustment
Tools.
3. Take an Adjustment tool off and recap a
Rubber Cap tightly after adjustment
completed.
Choose the Adjustment tool to suit
according to structure of Brake Drum.
MADE IN JAPAN
KYOTO TOOL CO.,LTD. 128,SAYAMA SHINKAICHI,KUMIYAMA-CHO,KUSE-GUN,KYOTO,613-0034,JAPAN