KNC-p3BR_XIR IP Super Beam IR Bullet Camera
·
Quick Operation Guide
12
12
3.
Route the cables through the large cable hole and connect the
corresponding power cable and network cable as needed
4.
Attach the camera to the wall or ceiling with the supplied screws
Figure 2-2
Fix the Camera to the Wall or Ceiling
5.
Adjust the camera direction (Refer to Figure 2-3).
1).
Loosen No.1 adjusting screw to adjust the pan position [0° ~
360°].
2).
Tighten No.1 adjusting screw.
3).
Loosen the No.2 adjusting screw to adjust the tilt position [0° ~
100°].
4).
Tighten No.2 adjusting screw.
5).
Loosen No.3 adjusting screw to adjust the image so it is upright
[0° ~ 360°].
6).
Tighten No.3 adjusting screw.
Adjusting
Screw