Quick Install Guide KNR-p16Px16 KNR-p32Px16
2
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
This manual is applicable to the models listed in the following table.
Series
Model
Type
Omni IP
KNR-p16Px16
KNR-p32Px16
Network Video Recorder
NVR Pre-Installation
These Omni IP series KNR-p16Px16 and KNR-p32Px16 NVRs are highly advanced surveillance equipment that
should be installed with care. Please take into consideration the following precautionary steps before installation of
the NVR.
1.
Keep all liquids away from the NVR.
2.
Install the NVR in a well-ventilated and dust-free area.
3.
Ensure environmental conditions meet factory specifications.
4.
Install a manufacturer recommended HDD.
NVR Installation
During the installation of the NVR:
1.
Use brackets for rack mounting.
2.
Ensure there is ample room for audio and video cables.
3.
When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
4.
Connect both the alarm (if used) and LAN/WAN cables.
5.
Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
6.
Ensure the NVR is grounded.
7.
Environmental temperature should be within the range of -10
ºC ~ 55
ºC, 14ºF ~ 131ºF.
8.
Environmental humidity should be within the range of 10% ~ 90%.
Hard Disk Installation
Before you start:
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory recommended HDD
should be used for this installation.
Up to 4 SATA hard disks can be installed on your NVR; or 2 SATA HDD plus optional DVD-RW.
Tools Required:
Screwdriver.
Front Panel
KNR-p16Px16 and KNR-p32Px16
No.
Name
Function Description
1
POWER ON/OFF
Power on/off switch.
2
USB Interface
Connect to USB mouse or USB flash memory.
3
IR Receiver
Receiver for IR remote control.
4
POWER
Power indicator lights in green when NVR is powered up.
