KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera
·
Quick Operation Guide
8
8
output is desired, Digital WDR is an OSD menu option. WDR status is
easily controlled by connecting together (or disconnecting) the bare
ends of the ‘switch cable’ (if WDR was ON, connecting the wires will
turn it OFF; if WDR was OFF, connecting the wires will turn it ON).
To employ a CVBS test monitor connected to the black CVBS BNC
connector, if True WDR is on, connect the wires; when ready to put
the camera in service, disconnect the wires. If True WDR was not
active (and CVBS output is enabled), if desired after the CVBS output
is no longer required, connecting the wires will turn True WDR ON.
2
Installation
Before you start:
Make sure the camera is in good condition and all the accessory
parts are included.
Make sure all related equipment is powered-off during the
installation.
Check to insure that the specifications of the camera are correct
for the installation environment.
Make sure the power supply voltage is 12VDC to avoid damage to
the camera. OBSERVE POLARITY!
If the product does not function properly, Dealers please contact
KT&C; End Users please contact your KT&C Certified Dealer or an
authorized service center. Do not disassemble the camera for
repair or maintenance by yourself.
Make sure that the mounting surface is strong enough to withstand
three times the weight of the camera.
