28
9. OSD MANUAL
- USER SET
Using Set button, display [USER SET] sub menu.
- COMM/GPIO SET
Using Set button, display [COMM/GPIO SET] sub menu.
- FOCUS MODE
Using Left / Right button, select on/off of Focus mode.
In Focus mode, Iris become full open and TV out screen display center crop
image.
In Focus mode, the OSD menu is off.
Using set button, Off the focus mode then display OSD menu back.
- LANGUAGE
Select OSD Language. (Only English is available, currently)
• USER SET (Sub Menu)
- SAVE USER SET
Save all setting value by User.
This setting can NOT be loaded automatically
when the Camera is power on.
It will be loaded by user using LOAD USER
SET menu. If the data is saved, [O] mark is
displayed on right side of LOAD USER SET
menu. if not, [X] mark is displayed.
- LOAD USER SET
Load the saved user set, and applies to
Camera.
- CLEAR USER SET
Clear all saved user set.
- FACTORY RESET
Clear all setting and initialize to factory setting.
Clear user set.
- CAMERA RESET
Reboot the Camera.
FOCUS MODE OFF
FOCUS MODE ON
> TV Out Image
[ USER SET ]
SAVE USER SET
LOAD USER SET
CLEAR USER SET
FACTORY RESET
CAMERA RESET
ESC
EXIT
[X]
