M 1 1 2 - M 3 2 1 - 0 0 2
Ultra-High Resolution
COLOR MODULE CAMERA
OPERATION MANUAL
Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please
read and follow these instructions.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes
purchased this product, or their local government office, for details
of where and how they can take item for environmentally safe
recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.
C A U T I O N
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER(OR BACK). NO USER.
SERVICING TO QUALIFED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient mangnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
F E AT U R E S
•
1/3” SONY EXview HAD CCD II
• High Resolution of 700TV Lines
• OSD (5-Port KEY)
• Multi Language
(ENGLISH / JAPANESE / GERMAN / FRENCH /
RUSSIAN / PORTUGUESE / SPANISH / CHINESE)
• 2DNR
• Privacy Zone 4Zones
• Motion Detection 4Zones
• DC IRIS Control (Option)
• Only DC12V
• ATR(Adaptive Tone-curve Reproduction / Digital WDR)
The function provides gradation compensation to improve
the contrast of subjects both low-luminance areas and high
luminance areas exist in the same picture
• IR Optimizer
If,when the night operation mode of the DAY/NIGHT function
is established, the mode is used together with an external
infrared LED light source, excessive front lighting may occur,
resulting in overexposure.
The IR Optimizer function makes it possible to minimize this
overexposure by optimizing the exposure
control during Night operations.
D I M E N S I O N S
Unit(mm)
C A U T I O N S
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note -
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.”
WARNING -
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Caution -
Any changes or modifications in construction of this devies which
are not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
CAUTION
1. A regulated DC12V 300mA power supply is recommended for use with
this camera for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be
out of subject.
2. It is recommended that the camera is used with a monitor that has a
CCTV quality 75 video impedance level. If your monitor is switched to high
impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal
componets. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reflective light,
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
- BOARD LENS -
- PIN HOLE LENS -
- VARIFOCAL LENS -
C A U T I O N S
Signal Format
NTSC
PAL
Image Device
1/3” 960H SONY EXview HAD CCD II
Scanning
System
2 : 1 Interlace
H.Resolution
7
5
0TV Lines
Scanning
Frequency
15.734KHz(H),
59.94Hz(V)
15.625KHz(H),
50Hz(V)
Total Pixels
1020(H) X 508(V)
1020(H) X 596(V)
Effective Pixels
976(H) X 494(V)
976(H) X 582(V)
Electronic
Shutter Speed
1/60~1/100,000sec
1/50~1/100,000sec
S/N Ratio
More than 50dB(AGC OFF)
Gamma
r =0.45
Min.
Illumination
0.1Lux / F2.0
Sync System
Internal
Video Output
1.0 Vp-p Composite 75(Ω) unbalanced
OSD
Built in
BLC
OFF / BLC / HLC
White
Balance
ATW / PUSH / USER1 / USER2 / ANTI CR /
MANUAL / PUSH-LOCK
2DNR
OFF / ON(Level adjustable)
ATR
OFF / ON(Level adjustable)
IR Optimizer
OFF / ON(Level adjustable)
Function
MIRROR / BRIGHTNESS / CONTRAST /
SHARPNESS/HUE / GAIN
Privacy
Masking
4 Zones
Motion
Detection
4 Zones
Day & Night
AUTO / COLOR / BW / EXT1 / EXT2
Lens
Vari-focal, Board,
Pinhole, C/CS Mount (DC-IRIS only)
Language
ENGLISH / JAPANESE / GERMAN /
FRENCH / RUSSIAN /
PORTUGUESE / SPANISH / CHINESE
Input Power
Source
DC 12V ±10% Max 100mA
Operating
Temperature
14°F~122°F (-10°C~+50°C)
Storage
Temperature
-4°F~140°F (-20°C~+60°C)
Operating
Humidity
Less than 80%
Dimension
32mmX32mm
Specifications and designs are subject to change for improving
the functionality of this product without notice.
S P E C I F I C AT I O N
< TOP VIEW >
17.2
1.2
9.7
16.2
1.2
1.2
32
32
28
28
C O N N E C T I O N
1) J102(DN_EXT)
PIN NO.
NAME
I/O
1
+12V
O
2
GND
-
3
Day&Night SIGNAL
I
2) J103(MAIN)
PIN NO.
NAME
I/O
1
Not used
-
2
K_DOWN
I
3
K_UP
I
4
K_ENTER
I
5
K_RIGHT
I
6
K_LEFT
I
7
GND
-
8
VIDEO
O
9
GND
-
10
+12V
I
3) J104(DC IRIS)
PIN NO.
NAME
I/O
1
DAMP +
O
2
DAMP -
O
3
DRV +
O
4
GND
-
J103
1 10
3 1
1 4
J102
J104
