3
If the unit finds the paired Bluetooth device, a beep is heard and the
POWER/CHARGING/ BLUETOOTH STATUS INDICATOR
will begin flashing at a
slower rate.
Remarks
:
•
Fast flashing is when the LED lights up 3 times every second.
•
Slow flashing is when the LED lights up 1 time every 8 seconds.
3. After successfully pairing (linking), you can begin playing music from your
Bluetooth device wirelessly to the speakerphone.
4. Press the Volume Up(+) / Down(-) button
on your Bluetooth device to adjust to the
desired volume level. Or press the button “+” to increase the volume,a bee alert
sounds when volume reach maximum level ; Press the button “-” to decrease the
volume.
Notes:
1. Refer to manual of your mobile phones, tablet, PC, computer or other
Bluetooth enabled device for Bluetooth operation, since it may vary from model
to model.
2. Your Bluetooth enabled device will not play the music through the
speakerphone, even if connected (linked), if the device does not support A2DP
or AVRCP profile.
3. If you are pairing (linking) your computer to the KT-9088 using Bluetooth, you
may need to set the speakerphone as your computer’s default sound device.
4. If the KT-9088 is left idle for about 5 minutes without linking to any Bluetooth
enabled device, it will automatically turn off to save battery power.
Using the KT-9088 as a Handsfree Bluetooth Speakerphone.
1. Link your cell phone to the KT-9088 via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap the ANSWER/
PLAY/STOP/PICK UP/HANG button on the speakerphone to switch the incoming
call from cell phone to the KT-9088 speakerphone. A short
beep sound will be
heard confirming the call was answered. Complete your call using the built-in
microphone and speakerphone on the KT-9088.
3. Adjust the volume control of unit to obtain the desired sound level.
4. To end the call, just tap the ANSWER/ PLAY/STOP/PICK UP/HANG button again
on the KT-9088. A short beep sound will be heard and the call will end. If you were
playing music from your cell phone to the KT-9088 speakerphone before
answering the call, the music will automatically resume playing when you hang
up.
5. To ignore an incoming call, simply tap the ANSWER/ PLAY/STOP/PICK UP/HANG
button on the speakerphone for about 2-3 seconds, a beep sound will be heard
and the call will be ignored.
Hang up with the KT-9088
A quick press on the
ANSWER/ PLAY/STOP/PICK UP/HANG
button will end the call in
progress. A short beep tone will be heard from the speakerphone confirming the call has
ended.
Re-linking to the mobile phone
If your mobile phone is already paired (linked) with the speakerphone, but became
unlinked even with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the speakerphone and then turning it on again to re-link your cell
phone. The
POWER/CHARGING/ BLUETOOTH STATUS INDICATOR
will flash
three times with two short beeps and them flash rapidly around 2 seconds if the
speakerphone and your cell phone have been re-linked successfully.
2. You can also re-link the speakerphone by using Bluetooth operation of your cell
phone. Please refer to operation manual of your cell phone for more information.
