
© 2005 K.T. Sports, Ltd.
17
18
19
20
16
22
23
24
25
21
27
28
29
30
26
32
33
31
9-3-34-036HG05 (1)
9-3-34-082HG18 (8)
9-3-34-056HG11 (2)
9-3-34-046HG06 (1)
9-3-34-089HG13 (4)
35093SC15 (4)
9-3-34-031HG06 (2)
9-3-34-089HG15 (1)
9-3-57-511HG02 (4)
9-3-34-083HG04 (8)
9-3-34-089HG16 (2)
9-3-34-091HG07 (1)
35093SC24 (2)
9-3-34-036HG14 (2)
32085SC02 (4)
9-3-34-089HG17 (4)
9-3-34-013HG07 (1)
9-3-57-003HG08 (2)
34
9-3-57-511HG03 (4)
= 8 X 38 MM (8)
= 22 MM (8)
6
5
27
1
6
5
17
5
6
19
29
2
26
21
FIG. 1A
P. 3
1) Open the carton of your new Turbo Hockey Game near where you will play. Select a clean level floor.
This game requires at least two adults to assemble the table.
2) Remove all the contents from inside the carton and verify that you have all listed parts as shown on
the Parts Identifier. We suggest that you use the bottom carton as a clean flat work area to protect the
game. Carefully cut or tear the four carton corners so that the bottom is now your work area.
FIG. 1
3) Attach the Right (#2) and Left (#1)
Legs to the table using two Bolts
(#5) and two Washers (#6) per leg
using the 5mm Allen Key (#21)
provided. See Fig. 1A. Do not
tighten securely at this time.
3.5 X 14MM WASHER
HEAD SCREW
(16) PRE-INSTALLED
3.5 X 22MM FLAT
HEAD SCREW
END GOAL COVER
W/ITH LIGHTS (BLACK)
BLOWER AND WIRE
CONNECTOR
APRON CORNER
(BLACK)
4 X 32MM BOLT WITH
HEX NUT AND
WASHER
4 X 65MM WOOD
SCREW
5MM ALLEN KEY
SLIDE SCORER ASSEMBLY
(BLACK)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
(PRE-INSTALLED)
64" LED LIGHTED
GOAL POWER WIRE
5" BELL STYLE
LEG LEVELER
3 X 10MM WOOD
SCREW
ON/OFF SWITCH
(PRE-INSTALLED)
(PRE-INSTALLED)
KT SPORTS NAME
PLATE
4.5V BATTERY BOX
BATTERY BOX
PUCK CATCHER WIRE
GOAL COVER SCREW
CAP BLACK
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this game.
APRON CORNER TOP
CAP
(PRE-INSTALLED)
(PRE-INSTALLED)