Quick installation and operating manual
KT-Elektronik
Setting the system code number (selection of the hydraulic scheme)
Set rotary switch to configuration and parameter level;
Symbol time and parameter blink,
Display: key number
Turn rotary pushbutton;
Set valid key number
Push rotary pushbutton;
Display:parameter level 1
Turn rotary pushbutton;
Select 'Anl'
I - i.0.0
Push rotary pushbutton;
Display: system code number
i o i.2. i
Turn rotary pushbutton;
Edit system code number
Push rotary pushbutton; Confirm system code number, reset previously
adjusted function blocks to their default settings (factory defaults)
Display: 'End' – now modify system parameters
Activating und deactivating functions
A function is activated or deactivated in the associated function block. The numbers 0 to 24 in the top row of the display
represent the respective function block numbers. When a configuration level is opened, the activated function blocks are
indicated by a black square on the right-hand side below the function block number. For more details on function blocks, refer
to the operating manual.
The functions are grouped by topics:
CO1: Heating circiut (1)
CO5: System-wide functions
CO3: Solar circuit
CO6: Modbus communication
CO4: Auxilary heating / DHW circuit
Set rotary switch to configuration and parameter level;
Symbol parameter blink,
Display: key number
Turn rotarypush button;
Set valid key number
Push rotarypush button;
Display:parameter level 1
Turn rotarypush button;
Select configuration level,
activated function blocks are marked by „
- I
“, dectivated by „
-0
“
Push rotarypush button;
Display: Function block 5 (activ)
Turn rotary pushbutton;
Display: Function block 5 (inactiv)
Push rotary pushbutton; Confirm settings
If the function block is not closed, further function block parameters
can be adjusted.
Turn rotary pushbutton;
Modify further function blocks or confirm 'End' to leave
configuration level
12
KA_37387_SOL3-7_EN004
