1. INTRODUCTION:
This
is classed as Personal Protective Equipment (PPE) by the European PPE
Regulation (EU)2016/425 and has been shown to comply with this Regulation through the Harmonized European Standard
EN 795:2012 Type B.
Edge Concrete Anchor
This Anchor is designed to minimize the risk of /provide protection against the danger of falling from heights.
However,
always remember that no item of PPE can provide full protection and care must always be taken while carrying out
the risk related activity.
2.
PERFORMANCE AND LIMITATIONS OF USE:
The Anchor has been tested in accordance with EN 795:2012 Type B and
has achieved the following performance levels :
EN 795:2012 Type B Test
Result / Comment
General Requirements
for Anchor devices
(Clause 4.1)
Static Strength
(Clause 4.4.2.3)
Dynamic Strength
(Clause 4.4.2.2)
Corrosion Resistence
(Clause 4.2.2.1)
(PASS)
No sharp edges (PASS).
Sustained a force of 12 kN for 3 minutes (PASS).
When tested with rigid steel mass of 100 kg, the test mass held after test with
the device remaining stable throughout. (PASS)
No corrosion evident after 48 hours of salt spray testing. (PASS)
3. APPLICATION:
This Anchor is designed for fastening into a pre-defined hole of dia. 20 mm. through a drilling depth of
Minimum. The anchorage eye is used as an anchorage point for fall protection equipment.
4.
INSPECTION :
Visually inspect the system before each use to enusre that it is in a serviceable condition and is operating
correctly. If during inspection, doubts are raised about the safety of the system or a component, these should be replaced
either by the manufacturer or a competent person.
5.
PRECAUTIONS:
Ÿ
Ensure the Medical condition of the user does not affect his safety in normal and emergency use.
Ÿ
Ensure that the Anchor is installed directly above the user's head.
Ÿ
Ensure that the equipment is compatible with other items when assembled into a system.
89mm
Please read and understand the manufacturer's instructions for each component or part of the complete system.
Manufacturer's instructions must be followed for proper use, care, and maintenance of this product. These instructions must
be retained and be kept available for the user's reference at all times. Alterations or misuse of this product, or failure to follow
instructions, may result in serious injury or death.
Note:
The user is advised to keep this user instructions document for the life of the product.
01
