Installation
and
Operation
Manual
38
8.2.5 Installation Location
Figure 14
1. The inverter is suitable to be installed on vertical or backwards
tilt wall as shown above, the tilt angle should be less 15°.
2. Don’t install inverter on forward tilt wall.
3. Don’t install inverter on horizontal wall.
4. Mount the inverter at height same as eyesight for easy operation
and data reading.
8.2.6 Installation Procedure
●
Fix the rack to metal holder (standard)
The inverter standard with bolt group (including nut, flat gasket,
spring washer) before delivery. To make the inverter can be installed
to various metal holder. Use Ø12 driller kit to drill installation holes
on the metal holder according to the hole position of the rack. Then
fix the rack to metal holder by using bolt group.
Figure 15
