Installation Sheet
KSR98123 Sensor Set Up Guide
Read these instructions before commencing installation. Please give these instructions to the owner/occupier after
installation to retain for future reference/maintainence.
Drg No. KSR98123-IS-A
KSR Lighting Ltd, Unit E Hazleton Interchange, Lakesmere Road, Horndean, Hampshire, PO8 9JU
KSR Lighting Aftersales: 023 92 674343
E-mail: [email protected]
08.04.2020MAC
Instructions
Please note mains must be isolated before sensor is opened and set, this is due to the
dipswitches being in close proximity of a high voltage circuit
1. To access Dip Switches remove cap by releasing screw on top of Sensor casing (screw driver required)
2. With fixing screw removed twist cover anti-clockwise until the cover is free from the main body
3. referring to dipswitch table label on sensor housing and shown below set dip switches to desired setting and test
4. Once you are satisfied with your settings screw cover clockwise onto main sensor body and fix in place with screw to
secure.
Twist
Anti-clockwise
1 - Detection Range
Detection area can be reduced by selecting
the combination on the Dip Switches,
following the guide as shown here.
2 - Hold Time
Hold time means the time period you would
like the light to remain 'on' once the sensor
has detected movement.
3 - Standby Period
The standby period is the time the sensor
stays on for when the initial hold time has
lapsed, this is used when the user wants
the fitting to dim down to a reduced level
for a set period of time after the initial hold
time. If this is not required set dipswitches
to 0s and the sensor will turn off after the
hold time has lapsed
4 - Standby Dim Level
This is the level the sensor will dim down to
after the initial hold time has lapsed. This is
set in conjunction with switches 5,6 and 7.
5 - Daylight Sensor
The daylight sensor can be set to bring
the light 'on' at specific daylight levels.
To have the sensor function in daylight
set the Dip Switches to 2000lux.
Microwave sensors will detect movement through certain materials, if this
occurs reduce the detection area until any nuisance triggering stops.
Navara HB
Available finish: Black
IP65 Dimming Microwave Sensor
IP65
220-240V~50/60Hz
