KSR GRS 125, Руководство пользователя

Страница: 15 / 53

Turn signal switch
To signal a right-hand turn, push this
switch to
. To signal a left-hand turn,
push this switch to . When released,
the switch returns to the center posi-
tion. To cancel the turn signal lights,
push the switch in after it has returned
to the center position.
HANDLEBAR SWITCHES - RIGHT
2
4
1
3
1. Starter switch
2. Engine - ON / OFF
3.
Lever adjustment
4. Warning light switch /
INSTRUMENT AND CONTROL FUNCTIONS
14
3. Choke lever
4. High/Low beam switch
/
5. Turn signal switch
Horn switch
Press this
switch to sound the horn.
Passing beam switch
As long as the button is pressed will
light the high beam.
Choke lever
The operation of the choke lever facili-
tates the ignition and start of the vehic-
le while the engine is cold.
CAUTION
Do not forget to give back the choke
lever to the starting position after the
engine is warmed up.
High/Low bean switch /
Set this switch tof for the high
beam and to for the low beam.
Starter switch
Pull the clutch lever in and press the
electric starter switch
to start the
vehicle.
CAUTION
At the same time you have to pull the
brake lever to start the vehicle. For st-
arting the vehicle read the notes in ma-
nual.
Engine - ON / OFF
By toggling the position of the switch,
you can switch the engine on
and
off .
Caution when starting the vehicle.
Lever adjustment
You can adjust the lever distance to
suit your needs. Push the lever forward
slightly and turn the screw in the desi-
red positions of the four, this must be
on the lever opposite the arrow symbol.
Position 1 is the longest and the shor-
test distance position 4.