KSR Moto GRS125 2013, Руководство пользователя, Страница: 40 / 51

39
CLEAN AND STORAGE
CLEAN THE VEHICLE
Cleaning the vehicle in proper and sui-
table way will make it attractive, extend
it’s life and optimize the performance.
Before cleaning
1.
Let the engine/ muffler cool down.
Cover the muffler outlet with a plas
-
tic bag to prevent water to get inside.
2. Close every caps, covers and elec-
trical connectors so that no water
can get inside.
CAUTION
• Do not use acid-based cleaners. If
such funds used for stubborn stains,
use them selectively, dry it immedia-
tely afterwards and then apply a cor-
rosion protection spray.
• Always follow the manufacturer‘s
instructions on care and cleaning
agents.
• Use best only water and mild de-
tergent or special cleaner from the
dealer to the sensitive components
of the vehicle to prevent damage.
Dry the plastic parts with a soft, dry
cloth or sponge.
• Protect particularly plastic parts,
paint, headlight glass from harsh
chemicals such as fuel, rust remo-
ver, brake cleaner or similar. The
use of such agents may result in
malfunction, damage and affect the
security itself.
• Do not use a high pressure washer
or steam cleaner. This can cause
water to penetrate bearings, electri-
cal components such as connectors
or switches, lighting, ventilation ho-
ses, brake shoes and brake linings
or damage, seals, paint and other
surfaces.
Cleaning after normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge,
and then rinse thoroughly with clean
water. Use a toothbrush or bottlebrush
for hard-to-reach areas.
Cleaning after riding in the rain, near
the sea or on salt-sprayed roads
CAUTION
Since sea salt or salt sprayed on the
roads during winter are extremely cor-
rosive in combination with water, carry
out the following steps after each ride.
• Wait until the engine / exhaust have
cooled.
• Clean the vehicle with warm water
and a mild detergent.
• Do not use hot water, which increa-
ses the corrosive effect of the salt.
• Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.