Micro SD slot for MP3 external music
Power Supply: USB 5V
Up to 8 hours of continuous music
Battery Capacity: 500mAh
Built-in mic for handsfree call
Battery Type: Li-ion
Dimension: 68 x 68 x 60 mm
Charging time: 2-3 hours
Built-in Microphone
Short press to play the last song. Long press to reduce the volume
Press to play or pause. Press to answer incoming call
Short press to play the next song. Long press to increase the volume
Micro Sd slot
MP3 Mode
Off Mode
Bluetooth Speaker Mode
Mini USB Charging port/Aux input
User manual
USB cable
MicroSD card slot not incluided.
Bluetooth NFC Speaker Instalation Guide
Pairing with the Bluetooth device
a- Conecte las conexiones Bluetooth de su dispositivo y ponga en marcha el altavoz.
b- Turn on your device Bluetooth connections and power on the speaker.
c- Search for the BLUESPEAK04 speaker on your device.
d- A tone to confirm the speaker will be heard. The blinking red and blue LED will disapear when the speaker is connected to your device.
e- The phone and speaker will remember this connection for the next time you want to use it and will pair faster at that point.
d- If you need to connect to another phone, please make sure to remove the existing pairing first.
NFC pairing
NFC: Near Field Communication, is a connection standard for mobile devices (compatible with NFC). You can pair between your mobile device (if it is compatible
with NFC) and the speaker by only touching them together or bringing them into close proximity, normally no more than few centimeters.
Please, enable the NFC connection (check your mobile device user manual) and Bluetooth function of your mobile device. Place this last one close the part of the
speaker just up to the On - Off del button.
Your mobile device will ask if you want to pair it with the speaker. Confirm it by pressing Yes or Ok, then the pairing process will be completed.
Using the speaker as a speakerphone
When you have paired the speaker to your mobile phone and receive a call, the speaker will flash a blue light rapidly.
Press the (Play-Pause button) on the speaker to answer the call.
Pressing the (Play-Pause button) during a call will end it.
Low Battery
when the speakers battery runs low, a red light will flash every 10 seconds and you will hear a tone every 30 seconds.
Charging
when charging the speaker, the LED will turn to purple color.
Disconnection can happen in several ways:
a- Bluetooth mode is off.
b- phone disconnects the connection
c- When the speaker and the mobile telephone are out of range from each other. The speaker will disconnect the pairing session if it is out of range for more
