2-It takes 3 hours to fully charge for the first time. Each subsequent charge cycle takes around 2.5-3 hours.
3-LED will indicate red when charging , and goes off when charging is complete.
4-If you have not used the device for a few months, the LED might not turn red when first charging. It might take 15-35 minuts before the LED turns red.
5-We suggest fully charging the device at least every 2 months.
Turn On/Off
Turn On:press and hold the MFB button for about 3-5 seconds until the blue LED flashes once with a beep sound
Turn Off: press and hold the MFB button for about 3-5 seconds until the red LED flashes once with beep sound, then go off.
FAQS
1- Why cant the Bluear be paired with a phone?
-Pairing mode will last 3 minutes, it will turn off if no device is paired.
-Please check if your phone supports A2DP profile, have turned on Bluetooth and all nearby Bluetooth devices are showing.
2- Why cant Bluear be paired and connected with a laptop?
- Please make sure your laptop has Bluetooth function and the Bluetooth software support audio profile transmit.
3- Why Bluear turned off when supplying power to it?
- Press the MFB button to turn on Bluear . It will automatically connect with the last paired device and stream music whilst charging.
Working with a Bluetooth device
Pairing procedure:
a- Plug the 3.5 mm audio cable into the products 3.5 mm audio socket. Plug the other end (or 2 x RCA) into the audio input of your home hi-fi stereo system.
b- Keep the Bluetooth receiver and your Bluetooth source device (eg, smart-phone, tablet, laptop, etc) within 1 meter.
c- Press and hold the MFB button of Bluetooth receiver from power off status for around 6-8 seconds until the blue and red LEDs flash quickly and alternatively,
indicating it is in pairing mode.
d- Make your Bluetooth source device into pairing mode: Taking an iPhone as an example. Tap setting> Bluetooth > Bluetooth on > Ksix Bluear, Bluear will
automatically connect with your iPhone. In case you have an Smartphone from any other brand (Sony, Samsung, LG…) you have to follow the same instructions.
e- After successful pairing and connection, the Blue LED will blink twice every 4 seconds.
Receiving
Note: Pairing mode will last 3 minutes, if no device can be paired during this period, the Bluetooth receiver will automatically turn off.
The Bluetooth receptor can be pairing with a stereo Bluetooth device using the PIN code 0000, 1111, 8888 y 1234.
Turn on the Bluetooth receiver, it will auto enter into standby mode, then auto turn off after 10 minutes
The can remember 8 paired devise, but it can only be connected with 1 device each time. When the number of paired devices exceeds 8, the first one will be
replaced.
Each time the Bluetooth receiver turns on, it will connect to the last connected device automatically based on last paired device in range and Bluetooth visible. If
you want to pair it to other device, turn off the current devices Bluetooth function first and try to pair the receiver to the new device according to the above
procedures.
LED status
Function
Operation procedure
LED indicator
Power on
Press MFB for 3-5 seconds
Blue led flashes once
Power off
Press MFB for 3-5 seconds
Red LED flashes once
Pairing mode
From power off status, press MFB button for 6-8 seconds
Red and blue LEDs flash quickly and alternatively lasts for 3
minutes
Play - pause
Short press MFB button
Charging
Plug charging cable into Bluear Micro USB socket, Bluear will auto
power off
Red LED on during charging
Charging complete
Red LED off after charging complete
Charging whilst streaming
music
From power off status press MFB button once, to make Bluear
connect with
last connected device
Red LED on and blue,LED flashes once
We find most problems are caused by improper pairing. Please follow the instructions step-by-step.
Additional Information
Trademark Statement The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
This product is CE certified according to the provision of the R&TTE Directive (99-5-EC). Declare that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999-5-EC.
Содержание BLUEAR
Страница 3: ......
