KSI MultiFlow, Руководство пользователя

Страница: 11 / 31

7
KSi MULTIFLOW
USER'S MANUAL
14. Make sure ALL equipment is locked in position before operating.
15. Keep hands and feet away from the moving pieces of the equipment filling the MultiFlow, the
MultiFlow discharge gate, and other moving parts.
16. NEVER attempt to assist machinery operation or to remove trash from the equipment while in
operation.
17. Use ample overhead lighting during periods of low light, such as after sunset, to light the work area.
18. ALWAYS lockout and tagout ALL power sources to the equipment before beginning adjustments
or repairs.
19. Keep the area around intake free of obstacles such as electrical cords, blocks, etc. that might trip
workers.
Pinch Points
A pinch point is any constricting place on the equipment where injury could occur to the
operator if any body part should enter such place.
1. Some components of this equipment have sharp edges which can scrape and/or cut an operator.
2. Moving pieces of this equipment such as hopper gates can crush or sever an operator’s limb or even
kill.
Shields and Guards
1. Always keep all shields and guards in place during operation.
2. Missing shields for guards can be replaced for free by contacting KSi.
Beware of Electrical Hazards
Electricity can kill! Use extreme caution around electrical components.
Have your electric company check the transformer and lead wires to be sure they are large
enough to handle the additional load of the motor.
Electrical wiring should be done by a qualified electrician and all components shall comply with applicable
provisions of National Fire Protection Association Standard NFPA No. 70, American National Standard
Inst. ANSI-C1 or with the requirements of the authority having local jurisdiction. KSi assumes no
responsibility for the electrical wiring used with this machine.