CONNECT THE TOP HOUSING TO KEYBOARD BASE
TCS1 ASSEMBLY
1.
Connect black TCS1 grounding wire to CON 7 on keyboard processor board
2.
Connect grey TCS1 cable to CON 4 on keyboard processor board
TACT SWITCH
Connect CON 1 tact switch cable to SW1 on keyboard processor board
RFID ASSEMBLY
Connect RFID cable to CON 6 on keyboard processor board
CLOSE THE KEYBOARD
1.
From SW1, route tact switch cable beneath Bluetooth adapter, over RFID assembly cable, along
the keyboard base, around and beneath RFID assembly
2.
Mold all other cables to fit the confines of the top housing
3.
Align top housing teeth with keyboard base teeth
4.
Using both hands, snap the keyboard closed, ensuring the top housing is securely shut on all sides
and that no gaps exist between the top housing and keyboard base joint
5.
On keyboard underside, use the triangular bit and screws to secure the base to the top
(Note: Avoid over-screwing to prevent screw breakage)
LABEL THE KEYBOARD
On the underside of keyboard, apply part number label over
“KSI
-
1700 B Black”
