code R30013.110en www.kseniasecurity.com
ed.06/2020
PRODUCT DESCRIPTION
INSTALLATION
It is recommended to mount the transmitter on the top of the door/window on the fixed frame and the
magnet to the movable part.
Make sure that the distance between the magnet and the indicator on the transmitter (shown in the
following image) does not exceed 10 mm.
NOTE: To take advantage of back tamper is necessary to use the screws (not included). Use the supplied
adhesive in alternative.
Legend
Transmitter
Magnet
Cable Wiring:
A - Auxiliary Input 1
B - Auxiliary Input 2
C - Common
Signalling LED. By
setting the test mode on
Panel, this LED blinks
whenever the device
successfully transmits an
alarm or reset signal.
Transmitter
Magnet