Ksenia ergo M Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 10

Ksenia ergo M Скачать руководство пользователя страница 9

code R30021.110en www.kseniasecurity.com
ed.10/2020

How to read the control panel IP address from keypad

If the network, where the control panel is installed, supports DHCP, to read the IP address make the
following operations:

•

Step 1. make sure the control panel is connected to the network;

•

Step 2. enter the installer menu by dialing the PIN code on the numeric keypad (default: 123456);

•

Step 3. scroll the menu items up to "Networking" and press OK;

•

Step 4. the "IP Address" is displayed, make a note and exit the menu by pressing ESC twice.

Then type the IP address in the browser address bar: <https://

control-panel-IP-address

>.

Note: The default address will be 192.168.2.97 in the event that the network to which the control panel is
connected does not support the DHCP, so type <https://192.168.2.97> in the browser address bar.

NOTE: When you first switch on the keypad, the English menu will be displayed. To change the language, access
the installer menu from the keypad via the webserver.

CERTIFICATIONS

Technical data, appearance, functionality and other product characteristics may change without notice.

ergo S

ergo M

Europe - CE, RoHS
EN50131 grade 3 - class II
T031:2014
SSF 1014 Larmklass 3

Europe - CE, RoHS,
EN50131 Grade 3 - Class II
T031:2014

«
...
7
8
9
10
»

Содержание ergo M











Отзывы:

Нет отзывов