KSB STAAL 100 AKD Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 72

background image

5 Installation at Site

31 of 72

0570.81/22-EN

When installing the line blind valve without the shut-off elements (normal operating
condition), make sure bonnet 139 is fitted so that the pointer is oriented in flow
direction. This indicates that the fluid passage is open.

Installation location

The valve must not be fitted downstream of tees and level or three-dimensional
double bends.

5.3 Welding into the pipeline

Responsibility for welding the valve into the piping and for any heat treatment
required lies with the commissioned construction company or the plant operator.

CAUTION

Weld beads, scale and other impurities

Damage to the valve!

▷

Take suitable measures to protect the valve against impurities.

▷

Remove any impurities from the piping.

▷

If necessary, install a strainer.

CAUTION

Incorrect earthing during welding work on the piping

Damage to the valve (scorching)!

▷

Fully open the valve during welding. If the valve is equipped with a back seat,
run the obturator to an intermediate position.

▷

Never earth the electric welding equipment on the valve's functional parts.

CAUTION

Non-compliance with the max. permissible application temperature

Damage to the valve!

▷

Complete the weld seam in several steps to ensure that the temperature in the
middle of the body does not exceed the max. permissible application
temperature.

NOTE

For valves with socket weld ends, comply with the insertion depth given in the
applicable technical code. A gap between the pipe end and the base of the weld
socket prevents impermissible stress on the weld.

ü

The valve is installed in accordance with the appropriate pipeline isometry.

ü

Comply with the welding processes, filler metals and welding data laid down in
the welding plan.

1. Run the valve disc to the middle position prior to welding.

2. Verify that the butt weld ends are clean and undamaged.

3. Weld the valve into the piping in such a way that the valve/pipe welds are not

subjected to stresses, strains or torsion. During the welding process, ensure
constancy of the gap to the pipeline without radial offset.

4. When installing the valve with the stem in a horizontal position, adequately

support the weight of the actuator or gearbox.

5.4 Valves with actuator

Installation position and location (

Section 5.2, Page 30)

«
...
29
30
31
32
33
...
»

Содержание STAAL 100 AKD









































































Отзывы:

Нет отзывов

Похожие инструкции для STAAL 100 AKD

Бренд: Farris Engineering Страницы: 12

Бренд: Eastern Times Technology Страницы: 4

Бренд: Vacon Страницы: 18

Бренд: Samson Страницы: 100

Бренд: Radio Shack Страницы: 3

Evolution Series E9000

Бренд: GE Страницы: 44

PACSystems RX7i

Бренд: GE Страницы: 469

GuardSwitch 300 Series

Бренд: GE Страницы: 2

GuardSwitch 300 Series

Бренд: GE Страницы: 2

Masoneilan VariPak 28001

Бренд: GE Страницы: 24

Бренд: MADRIX Страницы: 36

iBox Hub 25020180

Бренд: Hans Grohe Страницы: 36

Бренд: PACH & COMPANY Страницы: 4

Бренд: Vacon Страницы: 6

Бренд: Vacon Страницы: 24

Бренд: Vacon Страницы: 30

Бренд: Vacon Страницы: 81

Бренд: Vacon Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды