KSB Guard, Инструкция по установке и эксплуатации

Страница: 18 / 40

5 Installation/Commissioning
18 of 40
KSB Guard
NOTE
To improve data transmission between the gateway and the transmission and
battery unit, you can rotate and tilt the gateway antenna (data transmission of
transmission and battery unit). The gateway antenna acts in the plane
perpendicular to the antenna’s axis. The transmission and battery unit should be in
this plane. (
ð Section 4.5, Page 13)
5.1.1.5 Fastening the gateway
1
2
Fig. 9: Fastening the wall bracket
1 Wall bracket 2 Bolts/screws
ü The gateway antennas have been fitted.
ü The gateway is connected to the power supply.
ü
The signal strength at the installation location has been checked and is sufficient.
1. Attach the wall mounting bracket supplied to a suitable wall using 2 screws.
2. Connect the rear adapter of the gateway to the wall bracket.
5.1.2 Installing the sensor unit
DANGER
Strong magnetic field
Danger of death for persons with pacemaker!
Interference with magnetic data carriers, electronic devices, components and
instruments!
Uncontrolled magnetic attraction forces between magnet-equipped components,
tools or similar!
▷ Keep a safety distance of at least 0.3 m.
WARNING
Hot surfaces of pump set
Risk of burns!
▷ Observe the manufacturer’s safety instructions for fastening the sensor unit and
using the adhesive.