KSB Guard, Инструкция по установке и эксплуатации

Страница: 13 / 40

4 Description
13 of 40
KSB Guard
4.5 Gateway
1 2 3 4 5
6
Fig. 4: Gateway
1 Antenna connection (data
transmission of transmission and
battery unit) 2 Status LED for supply voltage
3 Status LED S1 for connection status 4 Level LEDs for mobile network
signal strength (LTE)
5 Antenna connection for mobile
data (LTE) 6 Power supply connection
Table 8: Description of LED indicators
No. LED Status Description
2 Supply voltage OFF Device is out of operation or in the initialisation phase.
Green Device is in operation. No faults present.
Red Device is in operation. Faults are present.
Flashing red Firmware update is being installed.
3 Connection status OFF No mobile network, no Internet
Yellow Mobile network accessible, no Internet
Green Mobile network and Internet accessible
4 Mobile network
signal strength 4th LED green Signal strength > -75 dBm
3rd LED green Signal strength > -85 dBm
2nd LED green Signal strength > -95 dBm
1st LED green Signal strength < -95 dBm