KSB Etanorm FXV, Инструкция по установке и эксплуатации

Страница: 36 / 62

7 Servicing/Maintenance
36 of 62
Etanorm FXV
1311.83/06-EN
If required, the bearings may be lubricated with greases of other soap bases.
Make sure to remove any old grease and rinse the bearings thoroughly.
7.2.3.1.3 Grease quantity
Table 12: Grease quantity per grease-lubricated DIN 625 radial ball bearing
Size Code Grease quantity per
bearing
[g]
065-040-250 6305 2Z C3 5
065-040-315 6310 2Z C3 12
065-050-250 6305 2Z C3 5
065-050-200 6305 2Z C3 5
065-050-315 6310 2Z C3 12
080-065-200 6305 2Z C3 5
080-065-250 6307 2Z C3 10
080-065-315 6312 2Z C3 20
100-080-200 6307 2Z C3 10
100-080-250 6307 2Z C3 10
100-080-315 6312 2Z C3 20
125-100-315 6312 2Z C3 20
125-100-200 6307 Z C3 10
150-125-250 6312 2Z C3 10
150-125-315 6311 2Z C3 15
200-150-400 6311 2Z C3 15
250-150-400 6312 2Z C3 20
7.2.3.1.4 Changing the grease
CAUTION
Mixing greases of differing soap bases
Changed lubricating qualities!
▷ Thoroughly clean the bearings.
▷ Adjust the re-lubrication intervals to the grease used.
ü The pump has been dismantled for changing the grease.
1. Remove the outer cover plate of each bearing with a suitable tool. Dispose of
the cover plates.
2. Only half-fill the bearing cavities with grease.
Continue using the bearings without the outer cover plates (variant Z C3).