KSB EMV Series Скачать руководство пользователя страница 5

Страница: 5 / 54

1 General

5 of 54

EMV

7138.82/01-EN

1 General

1.1 Principles

This operating manual is valid for the type series and variants indicated on the front
cover.

The operating manual describes the proper and safe use of this equipment in all
phases of operation.

The name plate indicates the type series and size as well as the main operating data
and the serial number. The serial number uniquely describes the product and is used
as identification in all further business processes.

In the event of damage, immediately contact your nearest KSB service facility to
maintain the right to claim under warranty.

1.2 Target group

This operating manual is aimed at the target group of trained and qualified specialist
technical personnel.

1.3 Symbols

Table 1:

Symbols used in this manual

Symbol

Description

✓

Conditions which need to be fulfilled before proceeding with the
step-by-step instructions

⊳

Safety instructions

⇨

Result of an action

⇨

Cross-references

Step-by-step instructions

Note
Recommendations and important information on how to handle
the product

1.4 Key to safety symbols/markings

Table 2:

Definition of safety symbols/markings

Symbol

Description

DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,
will result in death or serious injury.

WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not
avoided, could result in death or serious injury.

CAUTION

CAUTION

This signal word indicates a hazard which, if not avoided, could
result in damage to the machine and its functions.

Explosion protection

This symbol identifies information about avoiding explosions in
potentially explosive atmospheres in accordance with EU Directive
2014/34/EU (ATEX).

General hazard

In conjunction with one of the signal words this symbol indicates a
hazard which will or could result in death or serious injury.

Содержание EMV Series























































Результаты поиска

Содержание EMV Series

Отзывы:

KSB EMV Series, Инструкция по установке и эксплуатации, Страница: 5 / 54

Результаты поиска

Содержание EMV Series

Отзывы: