KSB Calio S, Инструкция по установке и эксплуатации

Страница: 28 / 52

6 Commissioning/Start-up/Shutdown
28 of 52
Calio S
1157.8117/01-EN
6.2.4 Maximum operating pressure
CAUTION
Permissible operating pressure exceeded
Damage to connections and seals!
▷ Never exceed the operating pressure specified in the data sheet.
The maximum operating pressure is 10 bar.
6.2.5 Fluid handled
6.2.5.1 Permissible fluids to be handled
DANGER
Use for drinking water or foodstuff applications
Danger of poisoning!
▷ Never use the pump for drinking water or foodstuff applications.
CAUTION
Unsuitable fluids
Damage to the pump!
▷
Never use the pump to handle corrosive, combustible or explosive fluids.
▷ Never use the pump to handle waste water or abrasive fluids.
▷ Do not use the pump for foodstuff applications.
▪ Heating water to VDI 2035. If glycol content equals or exceeds 20 %, check and
verify operating data
▪ Pure, thin, non-aggressive, non-explosive and non-gaseous fluids not containing
any mineral oil, solids or long fibres
▪ Fluids with a maximum viscosity of 10 mm
2
/s
6.2.5.2 Density of the fluid handled
CAUTION
Impermissibly high density of the fluid handled
Motor overload!
▷ Observe the information on fluid density in the data sheet.
The power input of the pump set will change in proportion to the density of the fluid
handled.