8
Movitec V 2,4,6,10,15 & 90
4
Safety and environment
4.1
General
This KSB product has been developed using state-
of-the-art technology; it is manufactured with utmost
care and subject to continuous quality control.
KSB does not accept any liability for damage and
injury caused by not observing the directions and
instructions in this manual. This also applies in cases
of carelessness during the installation procedure, use
and maintenance of the product.
Non-compliance with safety instructions can
jeopardize the safety of personnel, the environment
and the product itself. Non-compliance with these
safety instructions will also lead to forfeiture of any
and all rights to claims for damages.
For example, in particular non-compliance can result
in:
•
failure of important pump/system functions,
•
failure of prescribed maintenance and servicing
practices,
•
injury to persons by electrical, mechanical and
chemical effects,
•
hazard of the environment due to leakage of
hazardous substances,
•
explosions.
Depending on specific activities, extra safety
measures may be required. Contact KSB if a potential
danger arises during use.
ATTENTION
The owner of the product is responsible
for compliance with the local safety
regulations and internal company
guidelines.
ATTENTION
Not only must the general safety
instructions laid down in this chapter
on "Safety" be complied with, but also
the safety instructions outlined under
specific headings
4.2
Users
All personnel involved in the operation, maintenance,
inspection and installation of the product must be fully
qualified to carry out the work involved.
Personal responsibilities, competence and
supervision must be clearly defined by the operator. If
the personnel in question is not already in possession
of the required know-how, appropriate training and
instruction must be provided. If required, the operator
may commission the manufacturer / supplier to take
care of such training. In addition, the operator is
responsible for ensuring that the contents of the
operating instructions are fully understood by the
responsible personnel.
4.3
Safety provisions
The product has been designed with the greatest
possible care. Original parts and accessories meet
the safety regulations. Modifications in the
construction or the use of non-original parts may lead
to a safety risk.
ATTENTION
Make sure that the product operates
within its working range. Only then the
product performance is guaranteed.
4.3.1
Labels on the product
The icons, warnings and instructions applied to the
product are part of the safety provisions. The labels
may not be removed or covered. Labels must remain
legible during the entire life of the product. Replace
damaged labels immediately.
Goodnal STP ST041 Disinfection & Outfall (KSB Service Water Pumps Pu-1030-010/020/030 OM Instructions) Vendor Manual
Q-Pulse Id VM404
Active 29/10/2013
Page 10 of 42
