15
14
REMOTE CONTROL FUNCTIONS
FOAM SOAP DISPENSERS
If available, the foam dispenser remote control can adjust the dispenser’s
settings. To use the remote control hold it in front of the sensor at a distance of
10-15cm (4-6”).
Attention: The remote control will not operate out of the recommended range
(too close or too far).
The remote control can be used to adjust the following functions:
1-SOAP QUANTITY
Press the + sign on the SOAP button to increase the soap quantity by increasing
the dispensing time. Press the - button to decrease it.
Indication: continuous blinking LED light in the sensor eye.
2-AIR QUANTITY
To improve soap consistency (“foamability) change the amount air to be mixed. Press
the + sign on the AIR button to increase the air quantity and the - to decrease it.
Indication: 2 blinks of the LED light in the sensor eye.
3-RES
This function resets the sensor back to its factory settings.
4-TEMPORARY OFF FUNCTION
2
3
5
1
4
This function temporary disables the
dispenser. Use this function to preform
maintenance in front of the sensor without
activating the system (for example: cleaning).
The soap dispenser will shut off for one
minute after this button is pressed once.
To return to normal operation before the
minute is over, press the On/Off button again.
5-FILL THE SOAP TANK
Once the soap tank has been filled \ refilled,
press the FILL button. The pump will run for
one minute, priming the piping with soap.
Once soap begins dispensing from the spout,
priming is complete. press the FILL button
again to stop the priming before the minute is
over.
Indication: continuous solid LED light in the
sensor eye.
If available, the soap dispenser remote control can adjust the dispenser’s settings. To
use the remote control hold it in front of the sensor at a distance of 10-15cm (4-6”).
Attention: The remote control will not operate out of the recommended range (too close
or too far).
The remote control can be used to adjust the following functions:
1-SOAP QUANTITY
The 1-4 drop keys allow the user to choose the desired soap quantity.
4
2.1 to 2.3 cc *
3
1.6 to 1.9 cc
2
1.2 to 1.6 cc
1
0.7 to 0.9cc
Indication: continuous blinking of the light in the sensor eye.
2
3
1
4
2-ADJ
This function resets the sensor back to factory
settings.
Indication: 2 blinks of the light in the sensor eye.
3-TEMPORARY OFF FUNCTION
This function temporary disables the
dispenser. Use this function to preform
maintenance in front of the sensor without
activating the system (for example: cleaning).
The soap dispenser will shut off for one minute
after this button is pressed once.
To return to normal operation before the
minute is over, press the On/Off button again.
Indication: OFF – 2 fast blinks, ON – 4 fast blinks
4-FILL THE SOAP TANK
Once the soap tank has been filled \ refilled,
press the FILL button. The pump will run for
one minute, priming the piping with soap.
Once soap begins dispensing from the
spout, priming is complete. press the FILL
button again to stop the priming before the
minute is over.
Indication: continuous solid light in the
sensor eye.
REMOTE CONTROL FUNCTIONS
LIQUID SOAP DISPENSERS
