Krups Prep&Cook, Инструкция по эксплуатации

Страница: 51 / 64

51
ENGLISH
Plug in the appliance, set the On/Off switch (H) to 1, and the LCD screen (C) displays all
settings at “0” (See Fig. 9)
USING THE APPLIANCE
1- Press the program of
your choice
(B1) , a trian-
gle appears on the
screen
(C4) In the case
of the soups, slow cook,
steam and pastry pro-
grams, successively
pressing the program
button takes you to the
different sub-programs.
2- The pre-programmed
settings can be modified
for the time of a recipe
(depending on the cho-
sen recipe, ingredients
and quantities prepared).
Press the speed selector
(B2) or the cooking tem-
perature selector (B3) or
the time selector (B4) ,
the setting chosen will
flash on the screen
(C1-
C2-C3) .
3- Adjust the setting(s) us-
ing the +/- selector (B6) .
4- When you have finished
modifying all your set-
tings, press the “start”
button
(B7) to start the
program. When your ap-
pliance is using cooking
mode, the red indicator
light
(B3) lights up to
inform you that cooking
has started.
5- When the program has ended, the appli-
ance emits 3 beeps.
6- At the end of the sauce, soup, slow cook
programs P2 and P3, steam cooking and
desserts, the appliance automatically
changes to keep warm mode for 45 min-
utes to maintain the preparation ready for
serving.
In the ‘sauces’ program, P2 and ‘slow
cook’ P3 program, desserts and manual
mode, the appliance motor functions at
a specific speed, in order to preserve the
preparation and avoid it sticking to the
bottom of the bowl.
To stop keep warm mode, simply press
the “stop” button (B7). If you open the lid,
press the locks (D2) or remove the bowl
and keep warm mode will be automatical-
ly stopped.
At the end of the sauce programs, slow
cook P2 and P3 and the dessert program;
AUTOMATIC PROGRAM MODE
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability.
In the event of instability, the motor rotation speed will be automatically reduced, if this
instability continues, the motor will be stopped and “STOP” will be displayed on the
screen. If this happens:
„
Check that the quantity of ingredients is not too large and that the speed used is the
correct one.
„
Check that you are using the recommended accessory.
„
Then restart your appliance normally.