Krups ORCHESTRO, Инструкция по эксплуатации

Страница: 12 / 15

22 23
• Start the desclaing programme by pressing
the control for about 3 seconds ( 32 ) .
The «on/off» , «empty collector» and
«descale» indicator lights are lit.
• Empty the tray and the coffee collector and
replace them on the appliance.
The «on/off» and «steam» indicator lights
flash and the «descale» indicator light is lit.
• Place a container with a capacity of at least
300 ml under the steam nozzle.
• Turn the steam/hot water selector to the
position ( 33 ) .
The descaling solution is pumped at regular
intervals (stops and starts for approx
10 mins)
and ejected via the steam nozzle.
The
«descale» indicator light flashes.
Note! Do not interrupt this cycle.
Wait until the
«empty
collector» light comes on.
When the steam circuit has been descaled, (after approx 10 mins) the «empty
collector» indicator light comes on.
• Empty the container
• Take out and empty (if necessary) the tray and the coffee collector.
Wait for
10
seconds and replace these parts on the appliance.
The «on/off» and «steam» indicator lights flash and the «descale» indicator
light is constant.
• Turn the steam/hot water selector to the position .
• The descaling continues and the descaling solution is ejected at intervals into
the used ground coffee holder (this takes about 15 mins).
• The «descale» indicator light flashes.
• When the «fill water tank» and «empty collector» indicator lights come on,
remove the drip tray and coffee collector compartment, empty it and replace it
on the appliance for the descaling to continue.You must repeat this operation
until the
«fill water tank» indicator light comes on.You can now continue
descaling.
Note! If the tank has been filled with more than
1
/
2
litre of water, the
«fill water tank» indicator light will not come on. Only the
«empty collector» indicator light is lit.
• Rinse the water tank thoroughly.
• Fill it with fresh water (at least
1
litre, i.e over half full) and replace it on the
appliance.
• Remove the tray, empty it and replace it.
The «on/off» and «steam» indicator lights flash and the «descale» indicator
light is lit.
• Place a container with a capacity of at least
300
ml under the steam nozzle.
• Turn the steam/hot water selector to the position .
• Water is pumped at intervals and ejected via the steam nozzle.The «descale»
indicator light flashes (this takes approx
3
mins).
• When the «empty collector» indicator light comes on, empty the container.
Remove and empty the drip tray and the coffee collector. Replace these parts on
the appliance.
The «on/off» and «steam» indicator lights flash and the «descale» indicator
light is lit.
• Turn the steam/hot water selector to the position .
• The descaling continues and water is ejected into the used ground coffee holder.
The «descale» indicator light flashes (this takes about 3 mins).
• When the «empty collector» indicator light comes on, empty the drip tray
and coffee collector and replace them.
The «on/off» and «rinse» indicator lights come on.
• Press the control .
• After rinsing, all the indicator lights go out.
• Remove the tray from the coffee collector. Clean these parts in hot water and
washing-up liquid. Rinse and dry the parts and replace them on the appliance.
Note! If, when the programme starts, there is not enough water in the
tank, you will be warned of this by the
«fill water tank» indicator
light coming on. Add water to the tank and the descaling will
continue automatically.
If the tray is not in position, you will be warned of this by the
flashing of the
«empty collector» indicator light. Replace the tray
for the descaling programme to continue automatically.
If you activate the steam/hot water selector by mistake, you will be
warned of this by the flashing of the
«on/off» and «steam»
indicator lights. Return the selector to the position for the
descaling programme to continue automatically.
If you press the control during descaling or if there is a power
cut, the descaling programme has to be
started again right
from the beginning .
Note! Do not interrupt the descaling cycle at any time. Be patient.
KRUPS KRUPS
Indicator Lights Indicator Lights
32
33