Important: It is recommended that you do not use oily, caramelised or flavoured coffee beans for
this machine. These kinds of beans may damage the machine.
3.1 First use / setting machine parameters
Use the rotating button to select a function, increase or reduce values.
Confirm your choice using the OK key.
Press
to turn your appliance on.
Fig. 10
Follow the instructions that appear on the “choice of language” screen.
Use the rotating button to choose a language (highlighted). Press the OK key to validate.
Select
Fig. 11
Confirm
Fig. 12
When you first use your appliance, it will ask you to set several parameters. If you unplug your appliance,
you will again be asked for some of these parameters.
The appliance will ask you to set:
Language
You can select your chosen language from those offered.
Volume Unit
Choose either ml or oz as your measurement unit.
Date
You must set the date.
Clock
You can choose between 12 hour or 24 hour time display.
Auto-off
You can choose the period after which your appliance will stop automatically, from 30 minutes to 4 hours
by 30 minute increments.
Auto-on
You can automatically start pre-heating of your appliance at your chosen time.
Water Hardness
You must set your water hardness between 0 and 4. See “Water hardness measurement” page 25 sec-
tion.
3.2 First use / setting installing the filter
ON first use, the product ask you if you want to change the filter. Press the OK key to validate and then
fold the instructions on the display.
To install the refill into the machine, screw the filter into the back of the water tank.
Adjust the month for installing the refill
Fig. 3
by turning the grey band located on the top end of the filter.
The month of replacing the cartridge is shown in position 2 as shown.
Place a 0.6 L container underneath the steam nozzle.
3.3 Rinsing the circuits
Rinsing out the coffee circuit :
Once you have turned the machine on and the preheating stage has completed, you can rinse out the
coffee circuit.
Place a container under the coffee outlets then select "YES" from the menu proposed. The rinsing cycle
will stop automatically after about 40 ml.
Rinsing out the steam circuit :
Place a container under the steam nozzle. Press the
key to rinse the steam circuit. The rinsing cycle will
stop automatically after the volume of water displayed has flowed through.
Press
at any time to display menus to perform rinsing and then select MAINTENANCE => OK =>
RINSING.
!
26
KR_ESPRESSO_EA83_EO_EA83_NEW CHARTE 30/05/13 11:34 Page26
