10
•
Once the container is full, reset the function
selector (d) to the off position
O
.
•
Repeat this operation until the tank has
been completely emptied.
•
Reset the function selector (d) to the off
position
O
and the switch (e) to «0».
Using the various functions of
your espresso
1. ESPRESSO FUNCTION
•
For best results, preheat the accessories
(filter holder and cups) by running water
directly into the cups (see «Before first use»).
. Preparing an espresso :
Your appliance enables you to prepare an
espresso either with ground coffee or with a
measure of «ESE» preportioned espresso
pods.
•
Fill the water tank and set the switch (e) to
«I». The indicator light (e1) will come on.
a. Preparing an espresso with ground
coffee :
•
Align the arrow located on the filter holder
with the desired position by turning the
selection ring (j1)
(5)
:
«
» = 1 cup
«
» = 2 cups
•
Put some ground coffee in the filter, firmly
pressing down the ground coffee with the
back of the spoon (1 measuring spoon (o) =
1 cup)
(5)
.
•
Clean the edges of the filter holder.
•
Fit the filter holder in place under the
percolation head
(3)
.
•
Place one or two espresso cups under the
filter holder. If necessary, adjust the height of
the grid support
(4)
.
As soon as the appliance reaches the
appropriate temperature, the indicator light (f)
will illuminate.
•
Now, turn the function selector (d) to the
position «
».
•
When the cups are full, turn the function
selector (d) to the off position
O
.
•
Slowly remove the filter holder, as there may
be a buildup of hot water still remaining in
the filter, and remove the ground coffee by
pressing the ejection button (j2)
(6)
.
The filter holder can now be refilled to
prepare more espressos.
b. Preparing an espresso with a measure
of « ESE »
•
Use only «ESE» type pods.
The E.S.E system was designed for making
espresso «ristretto» (pressed) Italian-style for a
quantity of coffee of between 35 and 50 ml.
«ESE», stands for «
E
asy
S
erving
E
spresso». It
is a pre-measured pod of coffee which has
been selected, ground and compacted
between two filter papers, rendering it ready-
to-use. This system simplifies the preparation
of an espresso by avoiding the need to
measure and tamp ground coffee - making it
significantly easier to clean and care for the
appliance.
It is neither intended nor recommended
that you make a long coffee with these
pods.
We advise that you take care not to damage
the «ESE» pods during handling and storage.
• Align the arrow located on the filter holder
with the position « 1 cup » «
» by turning
the selection ring (j1)
(5)
.
•
Place the measure in the filter holder. In the
case of an ESE pod with flaps, fold the flaps
down towards the interior
(7)
.
•
Put the filter holder in place under the
percolation head
(3)
.
•
Place a cup under the filter holder. If
necessary, adjust the height of the grid
support
(4)
.
As soon as the appliance reaches the
appropriate temperature, the indicator light (f)
will illuminate.
•Now,
turn the function selector (d) to the
«
» position.
• Once the recommended quantity of coffee
has been reached, turn the function selector
(d) to the off position
O
.
•
Slowly remove the filter holder, as there may
be a buildup of hot water still remaining in
the filter, and throw away the used ESE pod
by pressing the ejection button (j2)
(6)
.
