Kruger&Matz KM0650, Руководство пользователя

Страница: 17 / 60

17
Owner’s manual
EN
2. PAIRING (WITH ONE DEVICE)
1. Make sure the headphones are powered off.
2. To enter into the pairing mode, press and hold the multifunctional
button for 5 seconds until red LED & blue LED flash alternately.
3. Activate your phone (or device) Bluetooth function and search
for external devices. You’ll see a list of available devices; find and
connect with the headphones.
4. Enter “0000” PIN if necessary.
3. PAIRING (WITH TWO DEVICES)
This headphones support 2 devices multi-connection. It can pair with
two mobile phones simultaneously, and take the call from any of them.
1. After completing pairing with the first phone, turn off the headphones.
2. Then re-do the paring procedure with another phone.
3. Once the pairing is finished, restart the headphones. The headphones will
automatically connect to the phone (or device) that was connected before
disconnecting.
4. Short press the and keys simultaneously, it will enable the
multipoint connect function. From the list of found devices on
another mobile phone, select the headphone to connect it. Now, the
headphones are connected with two devices simultaneously.
4. OPERATION
• Power on: press and hold multifunction button for 2 seconds. Blue LED
flashes 2 times. Headphones turn on.
• Power off:
press and hold multifunction button for 3 seconds. Red LED
flashes 2 times, then the headphones turn off.
• Volume adjust:
press ‚Volume up’ or ‚ Volume down’ button to change
volume level.
• Play/Pause:
press multifunction button to pause music playback. Press
it again to resume playback.