Kruger&Matz KM0515, Руководство пользователя, Страница: 12 / 28

12
Owner’s manual
English
CONNECT YOUR DEVICE :
• Connect your active subwoofer to SUB out.
• Connect your CD player via its RCA cable to the RCA L/R input. Make sure you
connect the “L” plug to the left input channel and the “R“ plug to the right input channel.
• Connect your phone/tablet/MP3 via an AUX cable to Line In.
• Connect your DVD player via its optical fiber cable to the Optical Input.
• Connect your speakers to the Speaker Output. Make sure you connect
the -/+ and the L/R cables to the right input.
Note: Remember to press the desired source button on the remote control
for the audio source to work OR press the volume knob on the amplifier repetitively
to switch the input mode (the sequence is Bluetooth > Optical > Line In > Aux).
Notice: Please set your DVD player to PCM mode when you use the DVD device.
OVER-HEAT PROTECTION :
The amplifier will shut off to
standby mode automatically if the temperature over 85ºC, and it will re-start
to working mode automatically if temperature lower at about 60±10ºC
STANDBY:
1. Press Power button on the remote control, the unit enters into standby
mode, the power/standby indicator lights up red. Press the button again to exit
standby mode.
2. The amplifier will be in standby mode if there is no signal input
for 15 minutes. Please pay attention that not pull out the signal input cables from
the player devices, or the amplifier will not turn to standby.