Kruger Vigo KCG30, Руководство пользователя и инструкция по установке

Страница: 11 / 20

11
For proper operation of a gas appliance, the air necessary for the combustion
of the gas must be able to flow into the room naturally.
The air must flow into the room directly through openings in the outside
walls. These openings must have an unobstructed cross-section not less
than 1.18CFM or 2m
3
/h for each kw of power (see total power in kw on the
appliance nameplate).
...continued on next page
Gas intake connection:
Electricity Supply:
G1/2”
110-120v ~ 50/60Hz
Burner
Type
Max Output Natural Gas LPG / Propane
BTU/h Nozzle (mm) CFM Nozzle (mm) Cons g/h
Auxiliary Burner 5000 1 x 1.10 0.06 1 x 0.70 73
Semi-Rapid Burner 6800 1 x 1.29 0.11 1 x 0.80 124
Rapid Burner 8500 1 x 1.45 0.17 1 x 0.91 182
Triple Ring Burner 16000 5 x Ø 0.99 0.25 5 x Ø 0.56 327
Installation Premises
TECHNICAL DATA
INSTALLATION
This appliance must only be installed and used in rooms with permanent
ventilation to local standards.
Installation of the appliance and its connection to the electrical mains
must only be carried out by QUALIFIED PROFESSIONALS.
Before installation, it is important to check that the appliance is
DISCONNECTED from the electrical mains. KRUGER™ declines all
responsibility for any damages arising from installation in breach of the
regulations in force or from failure to comply with the accident prevention
regulations.
!