Krüger & Matz KMP-AD1, Руководство пользователя

Страница: 12 / 28

EN
Owner’s manual
12
CHARGING CASE
Use charging case to store and charge your earphones.
1. Insert one plug of the USB cable to the micro USB port of
the charging case. Insert the other plug to the compatible
PC USB port or AC adapter.
2. During charging red LED on the charging case flashes.
When the battery is fully charged, red LED is on.
3. It takes about 2 hours to fully charge the battery.*
* When earphones with not fully charged battery are placed
inside the case during charging, charging time may increase.
SPECIFICATION
•Speaker size: 6 mm
•Magnet: neodymium
•Frequency response: 20 Hz – 20 kHz
•Impedance: 32 Ohm
•S/N ratio: >=92 dB
•THD: <1% (1 kHz)
•Bluetooth version: 5.0
•Bluetooth range: up to 10 m
•Bluetooth profiles: A2DP, AVCTP, AVRCP, HFP, HSP, SPP, GAP,
SDP, L2CAP
•Built in microphone
•Microphone sensitivity: -38 dB +/-3 dB
•Voice call management
•Music playback
•Playback time: up to 4 h
•Talk time: up to 4 h
•Standby time: up to 150 h
•Battery capacity: 35 mAh (earbuds); 300 mAh (charging
case)
•Charging voltage: 5 V/1 A
•In set: charging case, USB cable, user's manual