Krüger & Matz KMDJ001, Руководство пользователя

Страница: 10 / 24

10
Owner’s manual
English
1. PLAY/PAUSE - Press to play/pause play.
• [CUE - Pressing CUE returns the track to the Cue Point and
pauses it. (If you haven’t set a Cue Point with the PAUSE button yet,
the Cue Point will be the beginning of the track). When you are at the
Cue Point, pressing and holding CUE will start playback. When CUE is
released, the track will return to the Cue Point and the track will be paused.
• [SYNC - Press this button to match the tempo and align the
beats of the track on that deck with the Track on the opposite deck
automatically.
2. SCRATCH - This switches the vinyl mode on/ off.
• [SHIFT 1]+PFL - The sound of channels for which the headphones
[CUE] button is pressed is output to the headphone.
• [SHIFT 2]+REV - Push the reverse button to play your track in reverse,
Push the reverse button again to cancel this feature.
3. SHIFT 1 - When another button is pressed while pressing the [SHIFT 1]
button, the blue function is called out.
4. SHIFT 2 - When another button is pressed while pressing the [SHIFT 2]
button, the red function is called out.
5. JOG WHEEL - When the vinyl mode is on, the scratch operation is
possible. When the vinyl mode is off, the pitch bend operation (adjustment
of the playing speed) is possible.
• [SHIFT 1]+Rotate PARAMETER 1 - Adjust the value associated with
Parameter 1 of the selected effect.
• [SHIFT 2]+Rotate PARAMETER 2 - Adjust the value associated with
Parameter 2 of the selected effect.
6. LOAD - Press this button to load the selected track to that deck.
• [SHIFT 1]+LOOP+ - Pressing the LOOP+ button doubles the set loop’s length.
• [SHIFT 2]+LOOP- - Pressing the LOOP- button halves the set loop’s length.
7. BROWSE KNOB-Turn this knob to scroll through and select your music
tracks in the software. To enter a folder or return to the next-highest folder
in the software, press the knob.
8. FOLDER OUT - Allows you to navigate through folders similarly in either
USB or CD mode.
9. LOW - Adjusts the low-end frequencies of the music on that deck.
• [SHIFT 1]+HIGH - Adjusts the high-end frequencies of the music on that deck.
• [SHIFT 2]+rotate Parameter 2 - Adjust the value associated with
Parameter 2 of the selected effect.
10. VOLUME - Adjusts the volume level of the music on that deck.
• [SHIFT 1]+KEY - Adjust the value associated with Key.
• [SHIFT 2]+GAIN - Allows you to increase the signal of each individual
channel by turning the knob clockwise. The channels signal is lowered
when the knob is turned counter-clockwise.
11. MASTER VOLUME - Adjusts the volume of the entire mix (the music both