Krüger & Matz KM3902, Руководство пользователя

Страница: 5 / 38

BATTERY OPERATION
- OPEN THE BATTERY DOOR AND INSERT 6 PCS "C-CELL" (UM-2/ LR14 TYPE)
BATTERIES. PLEASE OBSERVE CORRECT BATTERY POLARITIES OR THE SET
WILL NOT WORK.
- IMPORTANT: WHEN THE SET IS ONLY USED WITH AC, OR IS NOT USED FOR
4 WEEKS OR MORE, PLEASE REMOVE THE BATTERIES, TO AVOID DAMAGE TO
THE SET FROM LEAKAGE OF BATTERIES.
NOTE:
THIS UNIT HAS A "BATTERY SAVER" FUNCTION. IF YOU WISH TO PRESERVE THE BATTERY
LIFE USE THIS SWITCH (20). THE UNIT WILL NOT DRAW ANY POWER FROM THE BATTERY
WHICH WILL ENHANCE BATTERY LIFE WHEN NOT IN USE. PLEASE REMEMBER THAT
WHEN THE BATTERY SAVER IS USED, THE CLOCK (TIME SETTING) & RADIO (PRESET
STATION) MEMORY WILL BE LOST.
AC OPERATION (BUILT-IN TRANSFORMER)
- MAKE SURE THE SET VOLTAGE OF THE UNIT MATCHES YOUR LOCAL
HOUSEHOLD VOLTAGE.
- THE AC-CORD IS A DETACHABLE TYPE & CAN BE FOUND EITHER INSIDE THE
ORIGINAL BOX OR WITHIN THE BATTERY COMPARTMENT UNDER THE UNIT.
- INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH AC-POWER.
- INSERT THE TAIL END OF THE AC-CORD FIRMLY INTO THE AC-SOCKET BEHIND
THE UNIT. (PLEASE ENSURE THE TAIL END IS FIRMLY CONNECTED TO THE
SOCKET).
- THIS SET HAS A BUILT-IN POWER SAVING SYSTEM WHICH WILL AUTOMATICALLY PUT
THE SET INTO A "STANDBY MODE" TO REDUCE POWER CONSUMPTION WHEN IT DETECTS
THAT THE SET IS NOT IN USE.
- THIS AUTOMATIC SWITCHING TO "STANDBY MODE" WILL HAPPEN APPROXIMATELY 10-
15 MINUTES AFTER THE FOLLOWING CIRCUMSTANCES:
(A) "CD" MODE: CD PLAYBACK HAS STOPPED (eg. AT THE END OF A DISC).
(B) "USB" MODE: USB PLAYBACK HAS STOPPED.
(C) "CARD" MODE: CARD PLAYBACK HAS STOPPED.
(D) "AUX" MODE: NO INPUT SIGNAL IS DETECTED AT THE AUX INPUT JACK.
- TO RE-ACTIVATE THE UNIT AFTER IT HAS AUTOMATICALLY SWITCHED TO "STANDBY
MODE", SIMPLY PRESS THE "ON/STANDBY" KEY TO SWITCH ON THE UNIT.
5
KM3902
Krüger&Matz
POWER SUPPLY
INTELIGENT POWER SAVING SYSTEM