Krüger & Matz KM1961, Руководство пользователя

Страница: 11 / 47

Owner’s manual Owner’s manual
EN
EN
20 21
OPERATION
Turn on / off
Press STANDBY button to turn the unit on. The device will switch to the last
selected source.
Standby mode
Press and hold STANDBY to switch the unit to Eco Power standby mode. The
red Eco Power indicator turns on.
Note: After 15 minutes of inactivity, the device will automatically enter standby
mode (except FM / DAB radio and Bluetooth mode with connected external
device).
Sleep timer
This unit can switch to standby mode automatically after a set period.
• When the unit is turned on, press SLEEP button repeatedly to select a
preset period (in minutes)
• To deactivate the sleep timer, press SLEEP button repeatedly until [OFF]
(sleep off) appears.
Connecting FM/DAB antenna
1. Connect the FM / DAB antenna to FM
radio socket at the back of the unit.
2.If connection is poor, connect the
outside antenna.
Caution: To avoid noise, keep antennas
away from the system, the connecting
cord and the AC power cord.
Connecting to power supply
Caution:
• Ensure that the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
• Before connecting the AC power cord,
ensure you have completed all other
connections.
CONNECTING
Connecting speakers
1. To connect the speakers, slightly unscrew the nuts on the sockets on the
back of the main unit.
2.Insert the stripped part of the wire completely. The right speaker cables
should be connected to the "R" socket, the left speaker cables to the "L"
socket, making sure that the cables connected to the central unit are
connected to the speakers in the same way (red socket on the central unit
to the red socket on the loudspeaker, black in the same way as red)
3.Tighten the socket nuts firmly so that the inserted wires do not fall out.
1. To connect an external device to the KM1961 hi-fi system using an RCA cable
(not included), connect the cable to:
• the AUDIO IN (L&R) sockets on this unit.
• the audio output sockets on the external audio device
2.Connect an AUX IN (3,5 Jack) cable to:
• the AUX IN socket on this unit.
• the headphone socket on the external audio device
Connecting external device