Krüger & Matz KM0763, Руководство пользователя

Страница: 15 / 24

15
Owner’s manual
EN
HEIGHT ADJUSTMENT
• To adjust height, reach under the right side (close to the backrest) of the chair to find the
height adjustment lever (4). Lift the handle and raise your body up slightly to allow the chair
to rise to the desired height. To lower the seat, lift the handle. The chair will descend until the
handle is released or the chair reaches the bottom position. Please note: you cannot lower
this product without the use of body weight.
• When adjusting the proper height, make sure the legs remain in contact with the ground.
TILT
• To lock tilting function, push the height adjustment lever (4) in (into the cylinder (7)). To
enable the tilting function, pull out the lever.
• Tilt adjustment: this function is designed to adjust the resistance of the chair’s backward tilt.
To do so, use the knob (5) underneath the seat. Rotate it to the right to decrease resistance.
To increase resistance, rotate to the left.
BACKREST ANGLE
Pull up the backrest lever (6) at the right side of the chair and push the backrest (2) down to
adjust its angle. To set the backrest in the original, vertical position pull the lever without any
pressure on the backrest - it will automatically lift up.
PILLOWS
1. Lead the elastic belts (10) through the cutouts in the backrest.
Note: upper pillow belt goes through the cutouts horizontally, while lower pillow belts go
vertically.
2. Attach the belt clips together.
3. Adjust pillows as desired.
CLEANING AND MAINTENANCE
• Clean this chair periodically with soft, slightly damp cloth, then dry with clean, soft and dry
towel. Do not use any abrasives or chemical agents to clean this product as they can bleach
or damage the product.
• DO NOT expose this chair to humidity, water or any other liquid. Protect the product from
dust, heat sources, extreme temperatures and direct sunlight. Protect it from sharp edges
and other factors which could lead to its damage.
• Inspect the bolts/screws periodically and tighten them if necessary.