Owner’s manual
Owner’s manual
E
N
E
N
6
7
Owner’s manual
Owner’s manual
E
N
7
E
N
6
SAFETY INSTRUCTIONS
Read this instruction manual and keep it for future reference. Producer does
not take responsibility for damages caused by inappropriate handling and use
of the product.
• Read the instruction manual before first use and keep it for future
reference.
• Minimize the volume on your audio device before connecting the
headphones in order to avoid hearing damage from sudden exposure to
excessive volume. Keep the volume at a reasonable level throughout entire
time of using the headphones. To prevent damage to your hearing, do not
raise the volume too high.
• Do not use the headphones in places where the inability to hear ambient
sound presents a serious risk (such as at railroad crossings, train stations,
construction sites or on roads where vehicles and bicycles are traveling).
• Never use the headphones while driving a car, riding a motorcycle or bicycle
or operating any other vehicle, as it may cause potential risk to your safety.
• Stop using the headphones if you feel a tinnitus, hearing discomfort,
irritation or have other adverse reactions.
• Do not attempt to repair this device yourself. In case of damage, contact
with an authorized service point for check-up/repair.
• Do not subject the headphones to strong impact.
• Clean this device with soft, slightly damp cloth. Do not use any abrasives or
chemical agents to clean this product.
• Protect this product from moisture, humidity, water and any other liquid.
• Avoid using/storing it in extreme temperatures. Do not expose it to direct
sunlight and sources of heat.
• Never use this device if it is damaged.
• Use only authorized accessories.
PRODUCT DESCRIPTION
1. Microphone
2. Volume adjustement knob
3. Microphone mute switch
SPECIFICATION
Magnet: neodymium
Speaker size: 40 mm
Impedance: 32 Ohm ± 15%
Frequency response: 20 Hz - 20 kHz
Sensitivity: 106 dB ± 3 dB
Nominal input power: 15 mW
Microphone: omnidirectional
Microphone sensitivity: -42 dB ± 3 dB
SN ratio: 58 db
Cable length: 2,0 m
Input: Jack 3,5 mm
Dimensions: 160 x 69 x 190 mm
Weight: 162 g
OPERATION
1. Connect the 3.5 mm jack plug to the appropriate input on the external
device.
2. To control the volume level, use the volume control knob.
3. To turn off the microphone, slide the microphone mute switch.
1
3
2
