Krüger & Matz KM0600, Руководство пользователя

Страница: 12 / 29

22 23
Owner’s manual Owner’s manual
EN EN
CHARGING
1. Connect one plug of micro USB cable into the micro USB port of the headset.
2. Connect the other plug into AC charger or compatible PC USB port.
3. The red indicator is on when the headset is charging.
4. It takes about 2 hours to fully charge the headset.
5. When the battery is fully charged, the blue indicator is on.
Notes:
• When the battery level is low, LED indicator flashes red twice every 8
seconds. In that case use the supplied micro USB cable to charge the device.
• The headset will automatically turn off when plugged to a charger.
• Fully charge the headset before first use.
• Producer recommends using only supplied/authorized charging cable.
• The battery is non-removable. Do not attempt to remove the battery from
the headset; otherwise the headset may be damaged.
• A fully charged battery can provide up to 10 hours of talk time and 14
days of standby time. The actual talk time and standby time may vary with
different settings, way of usage and environment.
paired, blue LED flashes once every 8 seconds).
Notes:
• If pairing is not completed within 5 minutes, the headset will automatically
turn off. In that case repeat pairing process according to the instructions
given above.
• Every time the headset is switched on, it will connect to last connected device
automatically. Please note, your device must be on with Bluetooth function
turned on.
• When the devices are paired but the operating distance between them is
exceeded, you will hear a voice prompt and the devices will disconnect. If the
devices re-enter the operating distance within about 10 minutes, they will
pair automatically. Otherwise, the headset will turn off.