KRUG+PRIESTER IDEAL AP60 PRO, Руководство по эксплуатации, Страница: 24 / 25

47
Supplier‘s Declara on of Conformity
47 CFR § 2.1077 Compliance Informa on
This device complies with part 15 of the FCC Rules. Opera on is subject to the following two
condi ons:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired opera on.
Manufacturer : KRUG + PRIESTER GMBH & CO KG
Simon-Schweitzer-Straße 34
72336 Balingen, Germany
U.S. Responsible Party : MBM Corpora on
3134 Industry Drive
North Charleston SC, 29418
Te TT l: 843-552-2700
Mail: info@mbmcorp.com
Trade Name : IDEAL
Models : AP 30/ 40/ 60/ 80/ 140 PRO
Classi ca on : FCC Part 15B
We herby declare, that the equipment bearing tradename and model number speci ed above
was tested conforming to the applicable FCC rule part(s) 15B and the most accurate
measurement standards We con rm that the necessary steps have been taken and are in force measurement standards. We con rm that the necessary steps have been taken and are in force
to assure that the produc on units of the same equipment will con nue to comply with the
Commission’s requirements.
Krug + Priester GmbH & Co KG
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a
residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However,r there is no
guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference
to radio or television recep on, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separa on between the equipment and receiver.rr
—Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To ensure compliance with FCC and ISED RF exposure requirements this device must be installed
to provide a minimum of 20cm between the device and people.